EAMS060

logo ruskin 60px

EAMS060

Ruskin model EAMS060 combines the precise measurement of the AMCA certified EAMS series air measuring station, with Ruskin’s ultra low-leak, class 1A rated control damper, the CD60.

The complete unit is factory assembled and calibrated to provide effective setpoint monitoring down to 100 FPM (0.51 m/s). The EAMS060 meets leakage requirements of the International Energy Conservation code. A high performance heated mass flow sensor positioned behind the air scoop manifold inside the sensor chase protects it from water carryover, making this a perfect application for outdoor air measuring applications. The unit comes standard with an application specific control panel that provides a 0-10V output, proportional to the flow.

 

STANDARD CONSTRUCTION

  • FRAME, Air Measuring Station 12" (305) deep double flanged 16 (1.6) gauge galvanized steel.
  • FRAME, Damper 6" X 1" (152 x 25) 6063T6 extruded aluminum T-Flange.
  • BLADES 6" (152) wide, galvanized steel, one piece airfoil shaped, double skin. Parallel blade standard, opposed blade optional.
  • AXLES 1/2" (13) plated steel hex.
  • BEARINGS Stainless steel sleeve type.
  • SEALS Blade: Ruskiprene. Jamb: 300 series stainless compression type.
  • LINKAGE Plated steel, concealed in frame.
  • AIR SCOOP MANIFOLD 3/4" (19) anodized aluminum pipe with duct averaging ports.
  • SENSOR Electronic heated mass flow sensor.
  • CONTROLLER Application specific set points factory calibrated. Program logic & calibration in nonvolatile EPROM.
  • ACCURACY 3% over measuring range.
  • POWER REQUIREMENTS 24 VAC +/- 15%, 10VA, 50/60 Hz to terminate at control panel terminal strip.
  • INPUT SIGNAL 1-5V w/o 250 Ω resistor (or BACnet).
  • OUTPUT SIGNAL 0-10V calibrated output signal (or BACnet).
  • VELOCITY REQUIREMENTS Product Range - 100 to 2000 FPM (0.51 m/s to 10.1 m/s) (Measured through face area)
  • OPERATING TEMPERATURE -20°F to 120°F (-29°C to 50°C).
  • MINIMUM SIZE Single 12"w x 12"h x 18"d (305 x 305 x 457).
  • MAXIMUM SIZE Single section - 18 sq. ft. (1.67m2 )

Related items

  • MDRS25 MDRS25

    The MDRS25 is a ruggedly built round manual balancing damper with factory mounted, locking hand quadrant designed especially for manual balancing applications within round spiral ductwork.

  • MD35 MD35
    The MD35 Manual Balancing Damper has a 5" frame.
  • MD25 MD25
    The MD25 Manual Balancing Damper has a 3" frame.
  • MD15 MD15
    The MD15 is a ruggedly built, inexpensive damper with stand-off bracket for the hand quadrant both factory furnished. It is designed for manual balancing applications with rectangular ductwork. 
  • ELM6DW ELM6DW
    The ELM90 Adjustable Louver is 6" deep and has a 37 1/2 degree blade angle.
More in this category: « EAMS EFAMS »

Air Delivery

Life Safety

Air Measuring

More Control

  • Current Sensors
    Current Sensors CU series Current Sensors provide a reliable and low cost solution to monitor current of supply/exhaust fans, pumps, compressors, unit…
    in Current

Proudly Representing

logo ruskin 60px logo nailor 60pxh ACME Logo Air Concepts FlexmasterLogo

InetSupervisor thermal header Engineered Comfort Mamac Logo